|
Product Details:
Payment & Shipping Terms:
|
| Powered Source: | Draging Cable | Operation Mode: | Pandent And Remote Controller |
|---|---|---|---|
| Cart Frame: | Q235B | Rail Gauge: | 1435mm (Customized) |
| Color: | Yellow/Customized | Wheel Type: | Cast Steel Wheel |
| Safrty Device: | Buffer, Alarm Light, Emergency Stop Buttons | Special Function: | Anti-Explosion, Heat-Resistant, Lifting, Dumpling |
| Highlight: | electric transfer cart,rail transfer car |
||
Introduction---Electrical Handling Vehicle
Our workshop electric handling vehicle is powered by draging cable . It can run on the 'S' and arc-shaped railways to carry many different kinds of stuff from one place to another. The workshop electric handling vehicle also can be used in the ferry condition and flammable, explosive environments, the hydraulic lifting device can be installed on the handling vehicle. This kind of transfer trolley is no running distance limitation.It has lots of adventure which include low costs and flexible operation...
Application---Electrical Handling Vehicle
Assembly line: Because of the advantage of without cable outside, the workshop electric handling vehicle is mainly applied in assembly line, can realize the straight rail, S shape rail, U shape rail, C shape rail, Arc-shaped rail, 90 degree turn rail, crossing rail etc.
Shot blasting room:With characteristics of low table height and wireless power, the workshop electric handling vehicle can transfer the workpiece to blasting room. The special used handling vehicle is equipped with board to protect the motor, reducer, electric appliance and battery. In order to sand blasting in all directions, our electric handling vehicle can be equipped with hydraulic device and rotary function.
Lathe transport: With advantages of large load capacity and wireless, the vehicle is mainly used in lathe producing factory to transfer lathes.
Components---Electrical Handling Vehicle
This kind of workshop electric handling vehicle is made up of Storage battery, battery charger, Shaft and connecting shaft, transfer cart wheels, electrical control box, transfer trolley frame, DC electric motor, , speed reducer, push button pendant, remote controller; The hydraulic lifting device can be added in the workshop electric handling vehicle.
Main Features---Electrical Handling Vehicle
The DC motor has the advantages of stable start, big starting power, small impact to the gear reducer, low voltage, long lifetime and so on.
Compared with other types, the PLC controlled steel platform motorized wagon is more safe and flexible. And the running distance is not limited. And there is no strict requirement for the construction of the railway.
Parameters---Electrical Handling Vehicle
| Model | BXC-2t | BXC-20t | BXC-50t | BXC-100t | BXC-150t | |
| Rated Load(t) | 2 | 20 | 50 | 100 | 150 | |
| Table Size (mm) | Length(L) | 2000 | 4000 | 5500 | 6500 | 10000 |
| Width(W) | 1500 | 2200 | 2500 | 2800 | 3000 | |
| Height(H) | 450 | 550 | 650 | 900 | 1200 | |
| Wheel Base(mm) | 1200 | 2800 | 4200 | 4900 | 7000 | |
| Rail Inner Gauge(mm) | 1200 | 1435 | 1435 | 200 | 2000 | |
| Wheel Diameter(mm) | 270 | 350 | 500 | 600 | 600 | |
| Wheel Quantity | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance(mm) | 50 | 50 | 50 | 75 | 75 | |
| Running Speed(min) | 0-25 | 0-20 | 0-20 | 0-20 | 0-18 | |
| Motor Power(kw) | 1 | 2.2 | 5 | 10 | 15 | |
| Battery Capacity | 180 | 180 | 330 | 440 | 600 | |
| Battery Voltage | 24 | 48 | 48 | 72 | 72 | |
| Running Time When Full Load | 4.32 | 4 | 3.3 | 3.2 | 2.9 | |
| Running Distance for One Charge(Km) | 6.5 | 4.8 | 4 | 3.8 | 3.2 | |
| Max Wheel Load(KN) | 14.4 | 77.7 | 174 | 343.8 | 265.2 | |
| Reference Weight(t) | 2.8 | 5.9 | 8 | 14.6 | 26.8 | |
| Recommended Rail Model | P15 | P24 | P43 | QU100 | QU100 | |
Contact Person: Mr. Mike Wang
Tel: 187 9067 5017
Fax: 86-0373-3020456
